Aussie made · Built to get flogged · 100+ designs, printed by hand
New range Trucks · Tippers · Semi trailers

Truck
Flappies

Big flaps for big rigs. Twice the width of the ute range, three drops to pick from, and the same tough print — or put your own logo on every wheel.

600 × 600mm truck mud flap (full drop) — Truck Flappies 600 × 350mm truck mud flap (short drop) — Truck Flappies 600 × 450mm truck mud flap (mid drop) — Truck Flappies
Sold in pairs

One width. Three drops.

Every Truck Flappie is 600mm wide. Pick the drop that suits how high your rig sits — they're shown below at true scale against each other, hanging off the same rail.

Mid drop 600 × 450mm

The all-rounder for tippers, tray trucks and most rigid trucks.

Printed pair · $360 Blank $220 · Your own design $460 Shop 600 × 450 designs →
Custom, same as the ute range

Your logo on every wheel.

A truck flap gets looked at by every car stuck behind it. Put your business name, phone number or fleet colours on there and it works the whole drive.

1 Design it

Upload your logo or artwork in the designer and set it up on the 600mm flap.

2 Leave a note

We print what you design. Need something nudged? Say so in your notes and Shane will sort it.

3 Kit out the fleet

Order as many pairs as you've got rigs. Every truck in the yard runs the same flaps.

Design your truck flaps Talk fleet orders

Bigger flap. Same Flappies.

Same tough material

Made from the same stuff as the ute and 4WD range, just cut to truck size.

Printed by hand

Every pair is printed here in Australia, whether it's a stock design or your fleet logo.

Slotted mounting holes

Slots across the top give you room to line them up on your existing hangers.

Truck Flappies — questions answered

Which size do I need?+

All three are 600mm wide. Measure from where the flap hangs down to the ground and pick the drop that covers your tyres without dragging: 350, 450 or 600mm.

Are they sold as a pair?+

Yes, every Truck Flappies order is a pair. Need more axles covered? Add more pairs to your cart.

Can I put my company logo on them?+

Yes. Custom works the same as the ute range: you design it, we print what you design, and Shane reads your notes for any adjustments.

Do the stock designs come in truck sizes?+

Pick a design in the shop and choose a 600mm truck size from the size options.

What size mud flaps for a tipper or tray truck?+

Most tippers, tray trucks and rigid trucks run the 600 × 450mm mid drop. Tight clearance or a low-set hanger? Go 600 × 350. High-riding semi trailers and prime movers take the full 600 × 600.

How much do truck mud flaps cost?+

Printed designs are $285 (600 × 350), $360 (600 × 450) or $470 (600 × 600) a pair. Blank pairs run $175, $220 and $290, and custom prints with your own artwork or fleet logo are $385, $460 and $570.